1000UF 10V SMD aluminum electrolytic capacitor Wholesale

INTRODUCTION

Product Parameter

Technical Specifications

Parameter	Standard / Reference Value	Parameter	Standard / Reference Value
Product Family	SMD Aluminum Electrolytic Capacitor	Series / Evidence Basis	Low-voltage SMD series — CDJVD 63–450V sheet is not applicable
Capacitance	1000µF nominal	Rated Voltage	10V DC
Capacitance Tolerance	±20% at 20°C, 120 Hz	Operating Temperature	Series-dependent; confirm low-voltage SMD controlled sheet
Construction	Polarized aluminum electrolytic	Mounting	Surface-mount V-chip
Case / Footprint	Case size and land pattern depend on the selected low-voltage SMD order series	Terminal Geometry	Confirm controlled drawing and PCB pattern
Rated Ripple Current	Case-, frequency- and temperature-dependent; confirmation required	Dissipation Factor	Low-voltage series criterion required
Leakage Current	Series formula and test time required; do not substitute CDJVD high-voltage formula	Endurance / Load Life	Series- and case-dependent; confirmation required
Shelf Life	1,000 h at 105°C reference; series recovery conditions apply	Surge Voltage	Use only the controlled series value; do not infer from rated voltage
Compliance	RoHS/order documentation must match current supplied lot	Final Release Basis	Controlled datasheet + drawing + quotation + approved sample
Source Priority	Confirmed product rating + standard low-voltage SMD engineering fields; attached CDJVD excluded by voltage range	Selection Rule	Do not approve from capacitance and voltage alone

Verification note: Values stated by the attached applicable LORIDA series file take priority over older website text. Confirmed title ratings are retained. When the exact series, case option, ripple value, lifetime, or compliance record is not identified, the controlled datasheet, drawing, quotation, and approved sample govern.

Product Information

Built around board-level selection and assembly

This 1000µF / 10V SMD aluminum electrolytic capacitor is a board-level selection starting point for compact filtering and local energy support. Final approval must align electrical stress, thermal rise, footprint, polarity, reflow exposure and the required service life.

Electrical review

Confirm working voltage, surge, ripple current by frequency, ESR or impedance, leakage and transient duty.

Thermal review

Evaluate ambient temperature, self-heating, nearby heat sources, cooling and the application life target.

PCB and assembly review

Match case diameter and height, land pattern, polarity, placement clearance, reel format and reflow profile.

Why the SMD format changes the selection process

Surface-mount aluminum electrolytic capacitors support automated placement and compact power filtering, but the same capacitance and voltage do not guarantee interchangeability. Case code, terminal geometry, polarity marking, ripple heating, impedance behavior, permitted reflow conditions and endurance must be reviewed together.

Power rails and converters

Review ripple spectrum, switching conditions, load steps, board temperature and available cooling.

OEM and EMS assembly

Control land pattern, polarity orientation, placement height, reflow exposure, reel packing and lot traceability.

Replacement and distribution

Cross-reference the original datasheet and physical package; never approve a substitute from the headline rating alone.

Qualification workflow

Define circuit stress: working voltage, surge, ripple waveform, frequency and transient conditions.
Lock the footprint: case dimensions, land pattern, polarity, height and nearby-component clearance.
Align assembly: placement method, reel orientation, reflow profile, handling and cleaning conditions.
Review thermal life: ambient, board temperature, self-heating, duty cycle and service-life target.
Approve samples: electrical behavior, fit, soldering, polarity, temperature rise and inspection criteria.
Control repeat supply: selected series, drawing, marking, packing, inspection and change requirements.

Ordering information

Send the complete application requirement so engineering and sales can review the same specification without repeated clarification.

Electrical duty
Capacitance, voltage, surge, ripple spectrum, frequency and circuit position

Mechanical interface
Case diameter and height, land pattern, polarity and clearance

Assembly process
Placement method, reflow profile, cleaning and reel requirements

Thermal and life
Ambient, board temperature, cooling, duty cycle and required life

Commercial program
Sample, order and annual quantities, marking, packing and delivery needs

Documents and approval basis

Request the current controlled datasheet, package drawing, recommended land pattern, reflow guidance, packing reference and order-specific compliance records for the selected series.

Final approval basis: controlled datasheet, controlled drawing, quotation and approved sample. Headline capacitance and voltage alone are not sufficient for release.